SPECIFICATIONS
Battery Included: No
Brand Name: NoEnName_Null
Hign-concerned Chemical: None
Material: Rubber
Origin: Mainland China
Voltage: 110-240V
KWC is an intelligent water filling and water change, suitable for events such as Water Filling and Water Changing in marine aquariums. The device can be controlled locally via App. This device has an optical level sensor(Anti-overflow sensor) which is used to control the start and stop of water filling equipment and overflow prevention of water changes; Has a float level sensor (Waste liquid anti-overflow sensor). It is used to prevent the overflow of the liquid waste bucket; It has three anti-dry combustion submersible pumps, namely a wastewater discharge pump, an additional marine water pump, and an additional fresh water pump. When chargingOverflowing water, filling the water shortage bucket and filling the water is overtimeWhichKWCWillHaveWhichIndicatorLightDanWhichBuzzerForAlarm.
|
Dimension(L*W*H) |
90x90x22mm |
|
Heavy |
150g (not including adapter) |
|
Power adapter |
Input: 100V AC ~240V AC Output:DC12V 1A |
|
Sensor |
Optical sensor and Float sensor |
|
Pump flow parameters |
Aliran: 230L/H Lift pompa: 200cm |
|
Interface |
Nirkabel lokal/Wi-Fi |
|
Work environment |
Temperature: 0-70 Humidity: 10%-90% (non condensing) |
|
Storage environment |
Temperature: -20 -85 Humidity: 10%-90% (non condensing) |
|
Light |
Status |
Description |
|
Network Status/power light |
(Blue) |
Successfully connected to cloud server |
|
Flashing (Blue) |
Successfully connected to Router Failed to connect to a cloud server |
|
|
(Red) |
Failed to connect to the router |
|
|
Off |
Not supported in |
|
|
P1: Wastewater Lamp P2: Add seawater Lamp P3: Add fresh waterLight |
Off |
Pump stops running |
|
(Green) |
Pump running |
|
|
Flashing (Red) |
Pump not connected |
P1:Discharge Sea water pump and Low liquid level detection
P2:Add Sea water pump and Low liquid level detection
P3:Add Fresh water pump and Low liquid level detection
S1:Refill and Anti-overflow sensor
S2:Waste water Anti-overflow sensor
T1:Tube Holder
B1:Siphon Break
Note
Please use the power adapter that comes with the product and operate under the specified operating environment.
Please install the pump and sensor according to the installation instructions.
When changing the water, run the discharge sea water pump and add sea water pump; when the water is lacking due to evaporation, run the add fresh water pump to make up the water.
The optical sensors need to be cleaned and wiped after long-time use to prevent the accuracy of the sensor from being affected.
Reviews